Heater Core Case: Service and Repair
DISASSEMBLY1. Remove the heater air plenum chamber from the instrument panel; refer to Instrument Panel Air Distribution Ducts. Disassembly and Assembly
2. Remove the screws and the A/C plenum demister adapter from the heater air plenum chamber.
3. Remove the screws.
4. Rotate the vacuum control motor and remove the vacuum control motor.
CAUTION: Do not attempt to bend any part of the A/C damper door shaft. It is brittle and will break.
5. Remove the screws from the rear seat airflow duct door vacuum control motor, if equipped.
6. Rotate the vacuum control motor and remove the vacuum control motor, if equipped.
CAUTION: Do not attempt to bend any part of the A/C damper door shaft. It is brittle and will break
7. Remove the eight screws and separate the heater air plenum chamber.
8. Depress the locking ramp and remove the pivot shaft from the windshield defroster door.
ASSEMBLY
1. Follow the disassembly procedure in reverse order.