Operation CHARM: Car repair manuals for everyone.

SSA/SSI, SSB/SS2 and TCC In Bench Mode

The BENCH MODE allows the technician to perform electrical circuit checks on the following components:
- SSA/SSI-Activates SSA/SSI OFF or ON.
- SSB/SS2 -Activates SSB/SS2 OFF or ON.
- TCC-Activates TCC OFF or ON.

OSC "SSA/SS1, SSB/SS2, TCC" BENCH MODE Operates ONLY when:
- anti-lock brake speed sensor and digital TR sensor are operational.
- no anti-lock brake speed sensor and digital TR sensor DTCs.
- transmission range selector lever in P.
- key ON.
- engine OFF.

OSC Command Values
- [OFF]-turns solenoid OFF.
- [ON]-turns solenoid ON.
- [XXX]-cancels OSC value sent.
- [SEND]-sends the values to PCM.

BENCH MODE Procedure for SSA/SS1, SSB/SS2 and TCC

Follow operating instructions from the NGS menu screen:
- Select "Output State Control."
- Select "Trans-Bench Mode."
- Select "PIDs" to be monitored.
- Monitor all selected PIDs during test.
- Select "Parameters-SSA/SS1, SSB/SS2 or TCC."
- Select "ON" to turn solenoid ON.
- Press "SEND" to send command ON.
- Select "OFF" to turn solenoid OFF.
- Press "SEND" to send command OFF.
- Select-XXX-to cancel at any time.
- Press "SEND."