Operation CHARM: Car repair manuals for everyone.

Condenser HVAC: Service and Repair

REMOVAL

CAUTION: To prevent system contamination, whenever the A/C condenser core is replaced, also replace the suction accumulator/drier.

NOTE: If an A/C condenser core leak is suspected, the A/C condenser core must be leak tested before it is removed from the vehicle.

1. Recover the refrigerant.
2. Remove the battery.







3. Remove the radiator upper sight shield.







4. Disconnect the condenser to evaporator tube from the A/C condenser core.







5. Disconnect the A/C compressor to condenser discharge line from the A/C condenser core.







6. Remove the bolts and remove the radiator supports.







7. Remove the two bolts.







8. Tilt the radiator back and lift out the A/C condenser core.

















INSTALLATION
1. Follow the removal procedure in reverse order.
^ Service the replacement A/C condenser core with the proper amount of PAG refrigerant compressor oil F7AZ-19589-DA or Motorcraft YN-12c or equivalent meeting Ford specification WSH-M1C231-B.
^ Lubricate the O-ring seal with PAG refrigerant compressor oil F7AZ-19589-DA or Motorcraft YN-12c or equivalent meeting Ford specification WSH-M1C231-B.