Maintenance: Technical Service Bulletins

• Customer Interest
  • A/C System - R 134A Conversion Kit
    • Overview
    • System Disassembly
    • Assembly Instructions
    • Charging A/C System & Final Testing
  • Wheels - Difficult to Remove
  • Drivetrain - Rear Axle Clicking Noise
  • Ignition System - Misfire at High Engine Speeds
  • Ignition Module - Engine No Start/Poor Start
    • Overview
    • Procedure
  • Ignition Timing - Poor Engine Performance
• By Symptom
  • Customer Interest
    • A/C System - R 134A Conversion Kit
      • Overview
      • System Disassembly
      • Assembly Instructions
      • Charging A/C System & Final Testing
    • Wheels - Difficult to Remove
    • Drivetrain - Rear Axle Clicking Noise
    • Ignition System - Misfire at High Engine Speeds
    • Ignition Module - Engine No Start/Poor Start
      • Overview
      • Procedure
    • Ignition Timing - Poor Engine Performance
  • Erratic Operation
    • Distributor Dwell - Erratic Readings
  • Noise
    • Drivetrain - Rear Axle Clicking Noise
  • Starting problems
    • Ignition Module - Engine No Start/Poor Start
      • Overview
      • Procedure
  • Sticking/Binding
    • Wheels - Difficult to Remove
• All Technical Service Bulletins
  • Warranty - Annual Corrosion Inspection
  • Maintenance Checklists - 30000 to 52500 Mile
  • Maintenance Checklists - 1000 to 22500 Intervals
  • Spark Plug - Recommendations
  • Hub Bearing - Adjustment
  • Distributor Dwell - Erratic Readings
  • A/C System - R 134A Conversion Kit
    • Overview
    • System Disassembly
    • Assembly Instructions
    • Charging A/C System & Final Testing
  • Alloy Wheel Rims - Tire Installation & Removal
  • Wheels - Difficult to Remove
  • A/T - Filter Replacement Interval
  • Drivetrain - Rear Axle Clicking Noise
  • Fusible Link - Service Repair Kit
  • Fusible Link - Replacement Procedure
  • Ignition System - Misfire at High Engine Speeds
  • Cranks - No Start/Hesitation When Driving
  • Ignition Module - Engine No Start/Poor Start
    • Overview
    • Procedure
  • Engine Oil - Winter Driving Specification
  • Engine - Oil Refill Quantity/Dipstick Level
  • Serpentine Drive Belt - Update
  • A/T - Fluid Level Checking
  • Hub Nut - Revised Torque Setting Procedure
  • Ignition Timing - Poor Engine Performance
  • ABS - Hot Flush And Bleed Update
  • Alignment - Toe Specification Change
  • Maintenance - Fluid Specifications/Applications