A/T - Selector Lever Binding: Overview
Bulletin # 87-047Section: Product
Dated: 09/21/87
Subject:
Service Action - 1987 Model Range Rover Gear Change Quality
TO: All Range Rover Dealers
To assure satisfaction of our customers and to avoid potentially costly future warranty repairs, we are undertaking a Service Action on certain listed 1987 model Range Rovers.
There have been a small number of reports, arising out of warranty and service, concerning stiff operation or binding of the main automatic transmission selector lever. The manufacturer has recently introduced a small "P" clip to locate the transmission selector level cable to the transmission housing. This ensures that, should the operation of the cable be impaired for any reason, the selector mechanism will still function correctly.
We feel it is desirable to extend this modification to those vehicles already in service as evidence of our commitment to customer satisfaction and eliminate the potential for customer complaints.
Please use the following procedure to deal with and/or prevent future customer complaints:
1. Using these instructions, install the clip on the operating cable on all vehicles as they are available at your dealership or presently on hand. A supply of clips and attaching parts has been dispatched to your Parts Manager at no charge. Additional stocks may be requested through our Technical Hotline. See the attached drawing and installation instructions for the proper method of attachment.
2. We will notify owners of vehicles that a product improvement which could affect the reliability of their Range Rover is' available at no charge. A sample of the customer letter is included. You are to contact owners as well to arrange an appointment at their earliest convenience.
3. A listing of vehicles subject to this Service Action has been allocated to your dealership. Warranty claims will be accepted for any vehicle, even though not allocated to you originally.
4. The attached warranty claim instructions include a provision for reimbursement of towing charges or service calls which are not normally eligible warranty matters. This option is intended to minimize customer inconvenience and expense. Please note that prior authorization from RRNA is required.
You may receive complaints of stiffness or binding in the cable or shift operations. If you do:
1. Report any such complaint by using Product Reports or calling our Technical Hotline -- 1-800-622-0266.
2. Inspect the vehicle. If you find stiffness do not attempt to disassemble, lubricate or repair the gearbox selector operating cable. Replace the cable with a new part and install the clip. If necessary, your Zone Manager will contact your Range Rover mechanic to review the repair instructions. In the interim, any questions should be directed to our Technical Hotline. One replacement operating cable was included in your initial stock kit, and this supply must be replenished as necessary. If you replace a cable and install a clip, be sure to claim the clip separately using the attached instructions.
Please familiarize your staff with this Service Bulletin immediately and make plans to extend the maximum attention and benefits to your customers.