Operation CHARM: Car repair manuals for everyone.

Infotainment System - Various Issues

*NUMBER: JTB00065
(VERSION 2)*

MODEL: XK

*DATE: NOVEMBER 26, 2007*

THIS BULLETIN REPLACES JTB00065, DATED 15 OCT 2007. UPDATED INFORMATION IS SHOWN WITH ASTERISKS.

SECTION: 415-00

Infotainment Update - Repair Procedure

AFFECTED VEHICLE RANGE:
Jaguar XK VIN: B00001 - B15397
Model Year: 2007

CONDITION SUMMARY:

INFOTAINMENT CONTROL MODULE SOFTWARE UPDATES

CAUTION:
The three affected modules, Front Control/Display Interface Module (High Level Display Front), Infotainment Control Module and Audio Front Control Module, MUST be updated together. If any of these modules are replaced prior to completion of this bulletin, the other modules will require updating.

Situation:

A customer may have one or more of the following concerns:

^ Navigation screen displays kilometers (km) while the instrument cluster displays miles (mi).

^ Ambient temperature displays 0°F when it is actually 59°F.

^ Touch screen calibration mode is entered inadvertently.

^ *The vehicle powers down after one hour of non-use.*

Action: If a customer should express any of these concerns, perform the repair procedure outlined below.

TOOLS:

Jaguar IDS DVD 109 with Patch File *2* software or later and the Midtronics PSC-550 Vehicle Power Supply are required.





WARRANTY:

NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a ouantitv of zero.

REPAIR PROCEDURE

CONFIGURE THE FRONT CONTROL/DISPLAY INTERFACE MODULE (HIGH LEVEL DISPLAY FRONT), INFOTAINMENT CONTROL MODULE AND AUDIO FRONT CONTROL MODULE

CAUTION:
This procedure requires the Jaguar IDS DVD 109 with Patch File *2* or laterand the Midtronics PSC-550 Vehicle Power Supply.

1. Connect the Midtronics PSC-550 Vehicle Power Supply to the vehicle.

2. Connect IDS to the vehicle.

*CAUTION:
This step MUST be performed as the vehicle will power down after one hour unless the Smart Key is inserted into the starter control unit.*

3. *Insert the Smart Key into the starter control unit.*

4. Begin a new diagnostic session by entering the correct VIN for the current vehicle.

5. Follow the IDS prompts to read the vehicle configuration.

6. Select 'NO' when prompted 'Do you wish to read diagnostic trouble codes?'.

7. Press 'tick' to continue.

8. Follow all on-screen instructions to complete this task.

9. Select 'Vehicle Configuration tab' when the Content Model is displayed.

10. Select 'Module Programming' from the menu.

11. Select 'Configure Existing Modules' from the drop down menu.

12. Select 'Software Enhancement Program' from the drop down menu.

13. Select 'Infotainment System' from the drop down menu.

14. Select 'Front Control/Display Interface Module (high level display front)' from the menu.

15. Press 'tick' to continue.

16. Follow all on-screen instructions to complete this task.

17. Select 'Infotainment Control Module' from the menu.

18. Press 'tick' to continue.

19. Follow all on-screen instructions to complete this task.

20. Select 'Audio Front Control Module' from the menu.

21. Press 'tick' to continue.

22. Follow all on-screen instructions to complete this task.

23. When the task is completed, exit the current session.

24. *Remove the Smart Key from the starter control unit.*

25. Disconnect the IDS and Midtronics PSC-550 Vehicle Power Supply.