Transmission Mount: Service and Repair

Transaxle Support Insulator





Special Service tools

Removal
1. Raise and support the vehicle.





2. Install the special tool.





3. Position and adjust the special tool rear height adjuster.

NOTE: Left-hand shown, right-hand similar.





4. Position and adjust the special tool front height adjuster.

NOTE: Right-hand shown, left-hand similar.





5. Position and adjust the special tool engine height adjusters.





6. Remove the transaxle support insulator retaining nuts.





7. Remove the transaxle support insulator.

Installation





1. Install the transaxle support insulator.
^ Tighten to 133 Nm.





2. Tighten to 47 Nm.





3. Remove the special tool.

4. Lower the vehicle.