Fluid Line/Hose: Service and Repair

Transmission Fluid Cooler Tubes

Removal

WARNING: WHENEVER RELEASING THE TRANSMISSION COOLING SYSTEM FLUID, TAKE CARE TO PREVENT FLUID SCALDING. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

1. Remove the undertray.





2. Detach the transmission cooler tube.
1. Install the special tool.
2. Detach the transmission cooler tube.

NOTE: Lower transmission fluid cooler tube shown, upper similar.

NOTE: Allow the fluid to drain into a suitable container.





3. Remove the transmission fluid cooler tube.
^ Remove and discard the sealing washers.

NOTE: Lower transmission fluid cooler tube shown, upper similar.

Installation





1. To install reverse the removal procedure.
^ Install new sealing washers.
^ Tighten to 35 Nm.

NOTE: Lower transmission fluid cooler tube shown, upper similar.

2. Carry out a transmission fluid level check.

CAUTION: Use of any transmission fluid other than the recommended fluid, will cause transmission damage.