Seat Bladder: Service and Repair
Removal
1. Remove the front seat backrest. Removal and Replacement
2. Remove the head restraint.
- Press the tangs.
3. Detach the backrest cover.
- Detach the retaining strip.
4. Detach the backrest cover tension cords from the backrest.
5. Detach the backrest cover.
- Cut the hog rings.
6. Detach the backrest cover.
- Cut the hog rings.
7. Detach the backrest cover.
- Cut the hog rings.
8. Roll the backrest cover up the backrest.
9. Detach the lumbar motor from the seat backrest frame.
- Cut the cable ties.
10. Remove the lumbar assembly.
- Cut the cable ties.
Installation
1. To install, reverse the removal procedure.
NOTE: Install new cable ties and hog rings. Use hog ring pliers to close the hog rings. Do not use any other tool. The hog rings must be closed to overlap.