Operation CHARM: Car repair manuals for everyone.

Front Window Anti-Pinch

ON-VEHICLE REPAIR

POWER WINDOW MAIN SWITCH

Removal and Installation

REMOVAL
1. Remove the power window main switch finisher (2).




2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screw driver (A) etc.

CAUTION: Do not fold the pawl of power window main switch finisher.

NOTE: The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).

INSTALLATION
Install in the reverse order of removal.

NOTE: Power window main switch is exchanged or is detached it is necessary to do the initialization procedure. Refer to PWC-116, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement". Front Window Anti-Pinch