A/T Check Indicator Lamp Does Not Come On
A/T CHECK Indicator Lamp Does Not Come OnSYMPTOM:
A/T CHECK indicator lamp does not come on for about 2 seconds when turning ignition switch to ON.
DIAGNOSTIC PROCEDURE
1. CHECK CAN COMMUNICATION LINE
Perform self-diagnosis. Refer to SELF-DIAGNOSTIC RESULT MODE, AT104. TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS). Without Scan Tool
Is a malfunction in the CAN communication indicated in the results?
YES >> Check CAN communication line. Refer to DTC U1000 CAN COMMUNICATION LINE. Transmission Control Systems
NO >> GO TO 2.
2. CHECK A/T CHECK INDICATOR LAMP CIRCUIT
Check the combination meters. Refer to COMBINATION METERS.
OK or NG
OK >> GO TO 3
NG >> Repair or replace damaged parts.
3. CHECK TCM POWER SUPPLY AND GROUND CIRCUIT
Check TCM power supply and ground circuit. Refer to MAIN POWER SUPPLY AND GROUND CIRCUIT.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.