Operation CHARM: Car repair manuals for everyone.

Service Notice or Precautions

Service Notice or Precautions

ATF COOLER SERVICE
If A/T fluid contains frictional material (clutches, bands, etc.), or if an A/T is repaired, overhauled, or replaced, inspect and clean the A/T fluid cooler mounted in the radiator or replace the radiator. Flush cooler lines using cleaning solvent and compressed air after repair. For A/T fluid cooler cleaning procedure, refer to A/T Fluid Cooler Cleaning. For radiator replacement, refer to RADIATOR.

OBD II SELF-DIAGNOSIS
^ A/T self-diagnosis is performed by the TCM in combination with the ECM. The results can be read through the blinking pattern of the A/T CHECK indicator or the Malfunction Indicator Lamp (MIL). Refer to the table, SELF-DIAGNOSTIC RESULT MODE for the indicator used to display each self-diagnostic result.
^ The self-diagnostic results indicated by the MIL are automatically stored in both the ECM and TCM memories.
Always perform the procedure on AT39. HOW TO ERASE DTC to complete the repair and avoid unnecessary blinking of the MIL. General Notes

For details of OBD II, refer to, ON BOARD DIAGNOSTIC (OBD) SYSTEM.
^ Certain systems and components, especially those related to OBD, may use the new style slide locking type harness connector. For description and how to disconnect, refer to HARNESS CONNECTOR.