Operation CHARM: Car repair manuals for everyone.

Malfunction Indicator Lamp: Description and Operation

Malfunction Indicator Lamp (MIL)

DESCRIPTION




The MIL is located on the instrument panel.
1. The MIL will light up when the ignition switch is turned ON without the engine running. This is a bulb check.
If the MIL does not light up, refer to "WARNING LAMPS", or see "MIL AND DATA LINK CONNECTOR".
2. When the engine is started, the MIL should go off.
If the MIL remains on, the on board diagnostic system has detected an engine system malfunction.

OPERATION

MALFUNCTION INDICATOR LAMP
When an engine control malfunction occurs, signal is sent
- to combination meter terminals 15 and 16
- from ECM with CAN communication line.

When signal is received, the malfunction indicator lamp illuminates.

For further information, refer to "MIL AND DATA LINK CONNECTOR".