Receiver Dryer: Service and Repair

Removal and Installation of Liquid Tank

REMOVAL
1. Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant.
2. Remove air cleaner cover and front air guide. Refer to "AIR CLEANER AND AIR DUCT".
3. Remove front grille. Refer to "FRONT GRILLE".




4. Unscrew, and remove securing bracket piping.
5. Unscrew liquid tank securing bands.
6. Pull out liquid tank and liquid tank securing bands through the top.

INSTALLATION
Installation is basically the reverse order of removal.

CAUTION:
- Replace high-pressure pipe and high-pressure flexible hose O-rings with new ones. Apply compressor oil prior to installation.
- When recharging refrigerant, check for leaks.