Operation CHARM: Car repair manuals for everyone.

Vehicle Does Not Decelerate By Engine Brake

Vehicle does not Decelerate by Engine Brake

SYMPTOM: No engine brake is applied when the gear is shifted from the D2 to D1.

DIAGNOSTIC PROCEDURE
1. CHECK SELF-DIAGNOSTIC RESULTS
Execute self-diagnosis.
Do the self-diagnostic results indicate PNP switch, ATF pressure switch 5?
YES >> Check the malfunctioning system. Refer to DTC P0705 PARK/NEUTRAL POSITION SWITCH, DTC P1845 ATF PRESSURE SWITCH 5.
NO >> GO TO 2.

2. CHECK A/T FLUID LEVEL





Check A/T fluid level. Refer to Checking A/T Fluid.
OK or NG
OK >> GO TO 3.
NG >> Refill ATF.

3. CHECK CONTROL LINKAGE





Check the control linkage.
Refer to Checking of A/T Position.
OK or NG
OK >> GO TO 4.
NG >> Adjust control linkage. Refer to Adjustment of A/T Position.

4. MANUAL MODE SWITCH
Check the manual mode switch. Refer to DTC P1815 MANUAL MODE SWITCH.
OK or NG
OK >> GO TO 5.
NG >> Repair or replace damaged parts.

5. CHECK A/T FLUID CONDITION





1. Remove oil pan. Refer to Control Valve Assembly.
2. Check A/T fluid condition. Refer to Fluid Condition Check.
OK or NG
OK >> GO TO 6.
NG >> GO TO 9.

6. DETECT MALFUNCTIONING ITEM
Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to Symptom Chart. Symptom Chart
OK or NG
OK >> GO TO 7.
NG >> Repair or replace damaged parts.

7. CHECK SYMPTOM
Check again. Refer to Cruise Test - Part 3.
OK or NG
OK >> INSPECTION END
NG >> GO TO 8.

8. CHECK TCM
1. Check TCM input/output signal. Refer to TCM Input/Output Signal Reference Values.
2. If NG, recheck TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.

9. DETECT MALFUNCTIONING ITEM
Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to Symptom Chart. Symptom Chart
OK or NG
OK >> GO TO 7.
NG >> Repair or replace damaged parts.