Service Notice or Precautions
Service Notice or PrecautionsOBD-II SELF-DIAGNOSIS
^ A/T self-diagnosis is performed by the TCM in combination with the ECM. The results can be read through the blinking pattern of the A/T CHECK indicator or the malfunction indicator lamp (MIL). Refer to the table on "Self-diagnostic result test mode" for the indicator used to display each self-diagnostic result.
^ The self-diagnostic results indicated by the MIL are automatically stored in both the ECM and TCM memories.
Always perform the procedure on AT-37, "HOW TO ERASE DTC" to complete the repair and avoid unnecessary blinking of the MIL. General Notes
For details of OBD-II, refer to "ON BOARD DIAGNOSTIC (OBD) SYSTEM".
^ Certain systems and components, especially those related to OBD, may use the new style slide-locking type harness connector. For description and how to disconnect, refer to "HARNESS CONNECTOR".