Operation CHARM: Car repair manuals for everyone.

A/T Does Not Hold Lock-Up Condition

A/T Does Not Hold Lock-up Condition

SYMPTOM
The lock-up condition cannot be maintained for more than 30 seconds.

DIAGNOSTIC PROCEDURE
1. CHECK SELF-DIAGNOSIS RESULTS
Does self-diagnosis show damage to engine speed signal circuit after cruise test?
Yes or No
YES >> Check the engine speed signal circuit. Refer to "DTC P0725 ENGINE SPEED SIGNAL".
NO >>GO TO 2.

2. CHECK SYMPTOM
Check again.
OK or NG
OK >> INSPECTION END
NG >> GO TO 3.

3. CHECK TCM INSPECTION
1. Perform TCM input/output signal inspection.
2. If NG, recheck TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK >> INSPECTION END
NG >>
1. Repair or replace damaged parts.
2. Replace the transmission assembly. Refer to "Precautions for A/T Assembly Replacement".