Cruise Test - Part 2
Cruise test Part 21. STARTING FROM D1
1. Move selector lever the "D" position.
2. Accelerate at half throttle.
With CONSULT-II Read the gear position. Does it start from D1 ?
YES >> GO TO 2.
NO >> Enter a check mark at "Vehicle can not be started from D1" on the diagnostics sheet, then continue the road test.
2. SHIFT UP D3 - D4 AND SHIFT DOWN D4 - D3
1. Accelerate to 80 km/h (50 MPH).
2. Release the accelerator pedal once, then quickly press it down again all the way.
With CONSULT-II.
Read the gear position and throttle position.
When you press the accelerator pedal, does the transmission immediately shift down D4 - D2?
YES >> GO TO 3.
NO >> Enter a check mark at "Vehicle does not shift D1 - D2 or does not kick down D4 - D2" on the diagnostics sheet, then continue the road test.
3. SHIFT UP D2 - D3
Press the accelerator pedal down all the way and inspect whether or not the transmission shifts up (D2 - D3) at the correct speed.
With CONSULT-II Read the gear position, throttle position and vehicle speed. Does the A/T shift up D2 - D3 at the correct speed?
YES >> GO TO 4.
NO >> Enter a check mark at "Vehicle does not shift D2 - D3" on the diagnostics sheet, then continue the road test.
4. SHIFT UP D3 - D4 AND ENGINE BRAKE
When the transmission changes speed D2 - D3, return the accelerator pedal.
Does the A/T shift up D3 - D4 and apply the engine brake?
YES >>
1. Stop the vehicle.
2. See "Vehicle Speed When Shifting Gears Throttle Position".
NO >> Enter a check mark at "Vehicle does not shift D3 - D4" on the diagnostics sheet, then continue the road test.