Camshaft
Install camshafts and camshaft brackets.^ Position camshaft.
^ Exhaust camshaft key at about 12 o'clock
^ Intake camshaft key at about 10 o'clock
Apply engine oil to bearings and cam surfaces of camshafts before installing them.
^ Position camshaft brackets as shown in illustration.
Apply engine oil to threads and seating surfaces of camshaft bracket bolts before installing them.
^ Tightening procedure
STEP 1:
Intake camshaft
Tighten bolts 9 - 10 in that order then tighten bolts 1 - 8 in numerical order.
2 Nm (0.2 kg-m, 1.4 ft. lbs.)
Exhaust camshaft
Tighten bolts 11 - 12 in that order then tighten bolts 1 -10 in numerical order.
2 Nm (0.2 kg-m, 1.4 ft. lbs.)
STEP 2:
Tighten bolts in the specified order.
6 Nm (0.6 kg-m, 4.3 ft. lbs.)
STEP 3:
Tighten bolts in the specified order.
Bolt type A B 10 - 12 Nm (1.0 - 1.2 kg-m, 7.2 - 8.7 ft. lbs.)
Bolt type C 18 - 25 Nm (1.8 - 2.6 kg-m, 13 - 19 ft. lbs.)
For additional information, refer to Cylinder Head Assembly; Service and Repair.