Crankshaft, Engine
| Crankshaft | Pin O.D. | 45 Millimeter (mm) | |
| Journal O.D. | 50 Millimeter (mm) | ||
| Bend | 0.03 Millimeter (mm) Or Less | ||
| Out-Of-Roundness, Taper Of Journal and Pin | 0.005 Millimeter (mm) Or Less | ||
| End Play | 0.05 - 0.175 Millimeter (mm) | ||
| Undersize Rework Dimension Of Pin | 0.25 | 44.704 - 44.722 Millimeter (mm) | |
| 0.50 | 44.454 - 44.472 Millimeter (mm) | ||
| 0.75 | 44.204 - 44.222 Millimeter (mm) | ||
| Undersized Rework Dimension Of Journal | 0.25 | 49.700 - 49.718 Millimeter (mm) | |
| 0.50 | 49.450 - 49.468 Millimeter (mm) | ||
| 0.75 | 49.200 - 49.218 Millimeter (mm) | ||
| Crankshaft Bearing Cap Bolt | 55 - 60 Newton Meter (Nm) |