Operation CHARM: Car repair manuals for everyone.

Overhaul





DISASSEMBLY
Follow disassembly steps outlined in illustration.

INSPECTION
1. Check the control cable for function and for damage.
2. Check the bushing for wear or damage.
3. Check the spring for damage or deterioration.





4. Check the overdrive switch for continuity.





5. Check the movement of shift control solenoid by applying battery voltage at terminal 4 and 5.





6. Check the PWR/NORM switch for continuity.
7. Check continuity between indicator light terminal 8 and 9.
8. Check continuity between parking position switch terminal 10 and 11 in free road.
9. Check no continuity between parking position switch terminal 10 and 11 while pressing the switch.





ASSEMBLY
Assembly is in the reverse order of disassembly.

1. Shift knob installation. Place the shift lever in the "N" position, and then turn the adjusting cam so that the clearance between the adjusting cam and the lever assembly are within the standard value.

Standard value (A): 15.2-15.9 mm (0.598-0.625 inch).

NOTE: Be sure to face B of the adjusting cam to the push button (driver's side).