Operation CHARM: Car repair manuals for everyone.

Intake Manifold/Chamber Assembly Removal/Installation




Service Information

Intake Manifold/Chamber Assembly Removal and Installation

View

1. Intake Manifold/Chamber Assembly Exploded View

Exploded View





Removal

NOTE: Refer to the Exploded View if needed during this procedure.

1. Vehicle - Lift

1. Raise the vehicle on a lift, and make sure it is securely supported.

2. Engine Cover





1. Remove the engine cover.

3. Intake Air Resonator





1. Remove the intake air resonator.

4. Intake Air Duct





1. Remove the intake air duct.

5. Intake Air Pipe





1. Remove the intake air pipe.

6. Throttle Body - Move





1. Remove the throttle body without disconnecting the hoses.

7. Engine Undercover





1. Remove the engine undercover (A).

8. Intake Manifold Bracket





1. Remove the intake manifold bracket mounting bolts.

9. Intake Manifold/Chamber Peripheral Assembly





1. Disconnect the connectors (A).

2. Remove the engine wire harness (B).

10. Intake Manifold/Chamber Assembly





1. Disconnect the PCV hose (A).

2. Remove the intake manifold/chamber assembly (B).

Installation

NOTE: Refer to the Exploded View if needed during this procedure.

1. Intake Manifold/Chamber Assembly





1. Connect the PCV hose (A).

2. Install the intake manifold/chamber assembly (B).

2. Intake Manifold/Chamber Peripheral Assembly





1. Install the engine wire harness (A).

2. Connect the connectors (B).

3. Intake Manifold Bracket





1. Install the intake manifold bracket mounting bolts.

4. Engine Undercover





1. Install the engine undercover (A).

5. Throttle Body - Move





1. Install the throttle body (A) with new gasket (B).

6. Intake Air Pipe





1. Install the intake air pipe.

7. Intake Air Duct





1. Install the intake air duct.

8. Intake Air Resonator





1. Install the intake air resonator.

9. Engine Cover





1. Install the engine cover.