Operation CHARM: Car repair manuals for everyone.

Campaign - IMA Battery Update

09-039

June 12, 2009

Applies To:
2009 Civic Hybrid - From VIN JHMFA3...95000002 thru JHMFA3...95006375

Product Update: Cold Weather IMA Battery Update

BACKGROUND

In areas of the country that experience very cold weather, the IMA battery monitoring system may incorrectly indicate a problem with the IMA battery. A software update is now available to correct the IMA battery monitoring system.

CUSTOMER NOTIFICATION

Owners of affected vehicles will be sent a notification of this product update. An example of the customer notification is at the end of this service bulletin.

Not all vehicles within the affected VIN range have a problem with the IMA battery monitoring system. To verify vehicle eligibility, check for at least one of these items:





^ The customer has a notification letter.

^ The vehicle is shown as eligible on a VIN status inquiry.

In addition, check for a punch mark below the first character of the engine compartment VIN. A punch mark in that location means this product update has already been completed.

Some of the vehicles affected by this product update may be in your new vehicle inventory. These vehicles must be updated before they are sold or leased. To see if a vehicle is affected by this campaign, do a VIN status inquiry before selling it, leasing it, or returning it to a service customer.

Should an unrepaired vehicle that was in inventory, or that came in for service after this service bulletin was issued, cause an injury or property damage because of the campaigned item, the dealership will be solely responsible to the damaged party, and will be required to defend and indemnify American Honda for any resulting claims.

CORRECTIVE ACTION

Update the IMA battery software and the PGM-FI software.

SOFTWARE INFORMATION

HDS Software Version:
2.018.007 (May 2009) (black) or later.

Control Module (CM) Update:
Application Version V6.1 7.03 or later.
Database Update 20-APR-2009 or later.





The updated PGM-FI and IMA battery software program IDs and P/Ns are shown. If these, or later program IDs are the current ones displayed during the update, the software for this product update is already installed.

NOTE:
Beginning with this HDS software release, three new DTCs may be stored after the software is installed. These DTCs can be erased only after both updates (PGM-FI and IMA battery) are completed. For more information on the three new DTCs, refer to Service Bulletin 09-026, 2006-09 Civic Hybrid: New DTCs U0301, U0302, and U0312.

WARRANTY CLAIM INFORMATION

Operation Number: 11 85A3

Flat Rate Time: 0.6 hour

Failed Part: P/N 1K100-RMX-A09
H/C 9194648

Defect Code: 5HW00

Symptom Code: R1100

Template ID: 09-039A

Skill Level: Repair Technician







REPAIR PROCEDURE

1. Update the IMA battery software and the PGM-FI software with the HDS. Refer to Service Bulletin 01-023, Updating Control Units/Modules.

2. Do the CKP pattern learn procedure with the HDS:

^ In the ADJUSTMENT MENU of the HDS, select CRANK PATTERN.

^ Select CRANK PATTERN LEARNING, and follow the screen prompts.

3. Do the idle learn procedure:

^ Make sure all electrical accessories (NC, radio, lights, etc.) are off.

^ Start the engine, and let it run until it reaches normal operating temperature (the cooling fans cycle twice).

^ Let the engine idle for 10 minutes.

4. Select START CLUTCH FEEDBACK LEARN on the HDS, and follow the screen prompts to calibrate the start clutch pressure control.

5. Use the HDS to clear all DTCs from all systems.





6. Center-punch a completion mark below the first character of the engine compartment VIN:

^ Slide open the FRAME NUMBER door on the center cowl cover.

^ Use a long punch to reach the VIN.





Disclaimer