Operation CHARM: Car repair manuals for everyone.

Brake Pedal Cover Replacement

Brake Pedal Cover Replacement

NOTE: This procedure is for models equipped with a metal brake cover.

1. Cover the carpet under the brake pedal to prevent metal shaving from getting on carpet.
2. Center-punch each of the rivets (A), and drill their heads off with a 0.12 in (3 mm.) drill bit (B).

NOTE: Do not drill the brake pedal plate (C).





3. Remove the brake pedal cover (D).
4. Install the brake pedal cover (A) with the rivets (B) firmly.





5. Make sure the brake pedal cover is fastened on the brake pedal by a hand.