Hot Idle Compensator (Non Comp. Controlled): Testing and Inspection

Air Bleed Valve B





1. Disconnect #33 hose from the vacuum hose manifold and connect a vacuum pump/gauge to the
2. Apply vacuum to the hose.

It should hold vacuum.

- If it does not hold vacuum, replace the air bleed valve B and retest.





3. Warm the air bleed valve B with a dryer and apply vacuum to the hose.

It should not hold vacuum.

NOTE: Air bleed valve B opens at 65°C (149°F)

- If it holds vacuum, replace the air bleed valve B and retest.