Solenoid Replacement
REMOVE OR DISCONNECTRemoving Starter Solenoid Lead Wire:
1. One nut and starter solenoid lead wire from starter solenoid.
Removing Field Frame With Armature:
2. Two bolts, separating field frame with armature from starter solenoid assembly.
Removing Drive Housing Assembly:
3. Two bolts and drive housing assembly from starter solenoid assembly.
INSTALL OR CONNECT
1. Drive housing assembly to starter solenoid assembly; secure with two bolts.
Tighten
^ Drive housing bolts to 5.9 N.m (52 lb. in.).
2. Field frame with armature to starter solenoid assembly; secure with two bolts.
Tighten
^ Starter through bolts to 5.9 N.m (52 lb. in).
3. Starter solenoid lead wire to starter solenoid; secure with one nut.
Tighten
^ Starter solenoid lead wire nut to 5.9 N.m (52 lb. in.).