No-Load Test
INSTALL OR CONNECTNo-Load Test:
^ Test leads from battery to starter assembly and ammeter.
Inspect
^ That the starter motor runs smoothly and drive pinion extends quickly and completely.
^ That the ammeter reads no more than 90 amperes at 11.5 volts during starter motor operation.
^ If the starter assembly performs satisfactorily and the ammeter readings are within the specified limits, the starter assembly is serviceable and should be reinstalled on the vehicle. If a cranking complaint exists, the starter should not be considered faulty and further diagnosis is necessary.
^ If the starter assembly does not perform satisfactorily during this test, refer to "Starter Disassembly" for further disassembly and inspection.