Cruise Control Servo: Service and Repair
REMOVE OR DISCONNECT1. Negative (-) battery cable.
2. Actuator cover.
Cruise Control Actuator Components:
3. Loosen the cruise control cable locknuts.
4. Cruise control cable from actuator lever and bracket.
Removing Cruise Control Actuator:
5. Actuator electrical connector.
Removing Cruise Control Actuator:
6. Three bolts, actuator and brackets from vehicle.
INSTALL OR CONNECT
1. Actuator and brackets to vehicle; secure with three bolts.
Tighten
^ Actuator bolts to 10 N.m (89 lb. in.).
2. Actuator electrical connector.
3. Cruise control cable to actuator lever and bracket.
Inspect
^ Cruise control cable for a loose fit. Replace as necessary.
Tighten
^ Cruise control cable locknuts to 5 N.m (44 lb. in.).
4. Actuator cover.
5. Negative (-) battery cable.