Operation CHARM: Car repair manuals for everyone.

Steering Wheel: Service and Repair

Steering Wheel

Removal and Installation
1. Remove the driver air bag module.





2. Turn the steering wheel to the straight-ahead position and turn the ignition switch to the OFF position.





3. Remove the steering wheel.
1. Disconnect the speed control electrical connector (if equipped).
2. Remove the steering wheel bolt.

4. WARNING: When installing the steering wheel make sure the air bag sliding contact is centralized. Failure to follow these instructions may result in personal injury.

CAUTION: After installation, check the correct location of the steering wheel on the steering column shaft by turning the steering wheel in a counterclockwise direction.

To install, reverse the removal procedure.