| Main Bearing Journal Diameter (inch) | | (2.2827-2.2835) |
| Out-of-Round Limit (inch) | | (0.00032) |
| Taper Limit (inch) | | (0.0003) (1) |
| Journal Runout Limit (inch) | (Runout of bearings 2,3 and 4.) | (0.002) |
| Crankshaft End Play (inch) | | (0.004-0.0l2) |
| Surface Finish (RMS) (micro inch) | | (12) |
| Clearance to Crankshaft (inch) | | (0.0008-0.0026) |
| Thrust Bearing Journal Length (inch) | | (1.135-1.136) |
| Connecting Rod Journal Diameter (inch) | | (1.7279-1.7287) |
| Out-of-Round Limit (inch) | | (0.00032) |
| Taper Limit (inch) | | (0.0003) per (1) |
| Surface Limit (RMS) (micro inch) | | (25) Rear |
| | (35) Front |
| Main Bearing Thrust Face Surface Finish (RMS) (micro inch) | | (25) |
| Rear (micro inch) | | (35) |
| Front Runout Limit (inch) | | (0.001) |
| Flywheel Clutch Face Runout Limit (T.I.R.) (inch) | | (0.007) |
| Flywheel Ring Gear Lateral Runout (T.I.R.) | Manual Transmission (inch) | (0.025) |
| Automatic Transmission (inch) | (0.06) |
| Crankshaft End Play (inch) | (0.004-0.012) |