Torque Specifications
Fig. 19 Cylinder Head Bolt Loosening Sequence:
Step 1: Tighten 10 bolts, in sequence, to 37-43 Nm (28-31 ft. lbs.).
Step 2: Rotate 10 bolts, in sequence, 85-95°.
Step 3: Rotate 10 bolts, in sequence, an additional 85-95°.
CAUTION: Cylinder head bolts must be replaced with new bolts. They are torque-to-yield designed and cannot be reused.
NOTE: Apply Engine Assembly Lubricant D9AZ-19579-D or equivalent meeting Ford specification ESR-M99C80-A to all cylinder head bolt threads and both sides of washer on head bolt prior to installation.