Piston: Service and Repair
DISASSEMBLY
1. Use Piston Pin Tool or equivalent to press the piston pin out from the connecting rod and piston assembly.
2. Remove the connecting rod from the piston, pin and ring.
3. Clean and inspect the connecting rod and piston, pin and ring.
ASSEMBLY
1. Lubricate the piston pin and piston pin bore.
1 Use engine oil meeting Ford specification WSE-M2C908-A1.
2. Position the piston pin in the bore aligned with the connecting rod bore.
NOTE: The connecting rod can be installed in either direction.
3. Use Piston Pin Tool or equivalent to press the piston pin into the piston, pin and ring and rod assembly.