Removal

Caliper Assembly:

1. Remove the wheel and tire assembly.

Parking Brake Rear Cable:

2. Remove the parking brake rear cable and conduit clip.
3. Loosen the parking brake rear cable and conduit adjusting nut. Remove the parking brake rear cable and conduit from the rear brake operating lever and the rear disc support bracket.
4. Remove the banjo bolt attaching the rear wheel brake hose to the rear disc brake caliper.
5. Remove and discard the two copper washers from the rear wheel brake hose.
6. Remove the brake caliper bolt.
7. Pivot the rear disc brake caliper downward off the rear disc brake caliper anchor plate and slide the rear disc brake caliper off the guide pin.