C3 Check Solenoid at Control Module

- Key OFF.

- Locate and disconnect the anti-lock brake control module.

- Measure the resistance between the following wires at the anti-lock brake control module connector(s).

Solenoid Wires

Left Front "Y/W" (circuit 407C) and "Y/GN" (circuit 403)
Right Front "Y/W" (circuit 407D) and "BL/O" (circuit 404)
Left Rear "Y/W" (circuit 407O) and "BR" (circuit 401)
Right Rear "Y/W" (circuit 407B) and "BK/Y" (circuit 402)

- Are the resistances about 3 ohms?

YES -- Go to Pinpoint Test H1. H1 Check System Integrity

NO -- Go to C4. C4 Check Solenoid at Hydraulic ABS Actuator Assembly