Removal
Special service tool(s) requiredDescription and Tool Number
Knuckle Puller ... T87C-1104-A
Hub Bearing Remover Adapter ... T92C-1104-H
Hub Support ... T89P-1104-A
1. Remove the wheel hub and front wheel knuckle.
2. Use a large screwdriver to remove the inner wheel bearing oil seal. Discard the inner wheel bearing oil seal.
Knuckle Puller And Hub Bearing Remover:
3. Use Knuckle Puller T87C-1104-A, Step Plate Adapter D80L-630-5 or equivalent, and Hub Bearing Remover Adapter T92C-1104-H to remove the wheel hub from the front wheel knuckle.
Mark Rotor Shield And Wheel Knuckle:
4. Mark the front disc brake rotor shield and the front wheel knuckle for proper assembly.
NOTE: If the front disc brake rotor shield is removed from the front wheel knuckle, it cannot be reused. The front disc brake rotor shield must be replaced.
5. Use a chisel to remove the front disc brake rotor shield.