Idle Speed/Throttle Actuator - Electronic: Service and Repair
REMOVAL1. Drain cooling system.
2. Mark the air and coolant hoses for ease of assembly, and remove the hoses from the Idle Air Control Bypass Air (IAC BPA) valve.
3. Disconnect the IAC BPA electrical connector.
4. Remove the IAC BPA bolts.
5. Remove the IAC BPA.
INSTALLATION
1. Position the IAC BPA and install the bolts.
2. Connect the IAC BPA electrical connector.
3. Install the air and coolant hoses.
4. Refill cooling system and check for leaks.