Operation CHARM: Car repair manuals for everyone.

Positive Crankcase Ventilation: Testing and Inspection


Positive Crankcase Ventilation Components:





1. Remove PCV Valve from the oil fill pipe on the left rocker cover.
2. PCV Valve plunger inside should rattle when shaken.
If not, replace PCV Valve.
If so, reinstall PCV Valve and proceed to the next step.
3. Start engine and idle until normal operating temperature is reached.
4. With engine at idle, disconnect the PCV closure hose from the right rocker cover.
5. Place a piece of paper over the nipple end.
6. Wait one minute. Vacuum should hold the paper in place.
If so, PCV system is okay, reconnect hose.
If not, check rubber grommets and connecting hoses for vacuum leaks. Check vacuum fittings for possible obstructions.