Test 10, Distributor Centrifugal Advance Check (Non-Turbo)
1. Ensure ignition timing and idle speed are set to specification.
2. Connect Rotunda Digital Engine Analyzer 059-00004, and Advance Timing Analyzer 059-00006, or equivalent to engine.
3. Disconnect and plug distributor vacuum hoses.
4. Start engine, then slowly raise idle speed while checking centrifugal advance timing.
5. If reading is as specified, proceed to Test 11.
6. If reading is not as specified, check governor components (bearings, plate, pivots, springs and weights) for damage or wear and replace as needed.