Operation CHARM: Car repair manuals for everyone.

Valve Body: Service and Repair

1. Raise and support vehicle.
2. Loosen pan attaching bolts and drain fluid from transmission. If fluid is to be reused, filter through a 100 mesh screen.
3. Remove transmission fluid pan attaching bolts, pan and gasket.
4. Remove filter screen and O-rings.
5. Remove low reverse servo cover, piston, spring and gasket.
6. Disconnect two wires at converter clutch solenoid and two additional wires at the 3-4 shift solenoid on Thunderbird and Ranger/Bronco II with V6-179 engine.
7. Remove bolts from control valve body. Note that bolts are of different lengths and their locations are different from bolt locations on other transmissions.
8. Carefully ease body from case while unlocking and detaching selector lever connecting rod.
9. Reverse procedure to install, torquing valve body retaining bolts to 71-97 inch lbs. and the oil pan attaching bolts to 8-10 ft. lbs.