| Camshaft Position Sensor Shaft Bearing Bore Diameter | Tappet Bore Diameter | 0.8752-0.08767 Inch (in) |
| Camshaft Bore Inside Diameter | No. 1 | 2.1531-2.1541 Inch (in) |
| No. 2 | 2.1334-2.1344 Inch (in) |
| No. 3 | 2.1334-2.1344 Inch (in) |
| No. 4 | 2.1531-2.1541 Inch (in) |
| Head Gasket Surface Finish (RMS) | 1.0-3.3 Micro-Meters (micro-m) | |
| Head Gasket Surface Flatness in 6.0 inches | 0.003 Inch (in) | |
| Cylinder Bore | Diameter | 3.504 Inch (in) |
| Surface Finish (RMS) | 0.45-0.96 Micro-Meters (micro-m) |
| Out-of-Round Limit | 0.001 Inch (in) |
| Out-of-Round Service Limit | 0.002 Inch (in) |
| Taper Service Limit | 0.002 Inch (in) |
| Main Bearing Bore | 2.713 Inch (in) | |
| Diameter | 2.712 Inch (in) | |