Operation CHARM: Car repair manuals for everyone.

Test Notes

NOTE: You should enter this pinpoint test only when you have been directed here from diagnostic routines, or from pinpoint test step S8.

This pinpoint test is intended to diagnose only the following:
- EGR Valve Position (EVP) sensor
- Harness circuits: VREF, EVP, SIG RTN, EVR, VPWR
- EGR Vacuum Regulator (EVR) solenoid
- Exhaust Gas Recirculation (EGR) valve assembly
- EGR and EVR vacuum lines
- Powertrain Control Module (PCM)

DESCRIPTION





- The EGR Valve Position (EVP) sensor monitors the position of the EGR valve pintle. The EVP sensor converts the mechanical movement of the pintle into an electrical voltage signal which is relayed to the PCM. The EVP sensor is a linear potentiometer in which resistance varies with the EGR valve pintle movement. The EVP sensor provides the PCM with information on EGR valve position and EGR system failures.





- The EGR Vacuum Regulator (EVR) solenoid receives a duty cycle signal from the PCM which allows it to control the vacuum level to the EGR valve. The remaining vacuum not used by the EGR valve is vented through the EVR solenoid filter to atmosphere.