Operation CHARM: Car repair manuals for everyone.

Front Tunnel Console

FRONT TUNNEL CONSOLE

REMOVAL

1. Remove the console bezel.
2. Disconnect the battery power supply electrical connector.

Fig. 16:




3. Remove the two front screws and the four screws from within the storage bin. (Fig. 16)
4. Move the seats forward and remove the two screws along the back of the console on the sides.

Fig. 17:




5. Lift the front of the console up and disconnect the electrical connectors. (Fig. 17)
6. Remove the console from the vehicle.

INSTALLATION

1. Position the console in the vehicle and connect the electrical connectors.
2. Install the rear of the console and then the front.
3. Install the rear screws.
4. Move the seats back and install the four storage bin screws.
5. Install the two front screws.
6. Connect the battery power supply electrical connector.
7. Install the console bezel.