Overhaul
DISASSEMBLY1. Disconnect and isolate the battery negative cable.
2. Drain the cooling system.
3. Recover the refrigerant from the refrigerant system.
4. Remove the Heater-A/C housing from the vehicle.
Fig. 4 A/C Heater Housing Retaining Screws:
5. Remove the HVAC housing screws.
Fig. 5 A/C Heater Housing Retaining Clips:
6. Remove the housing retainer clips.
Fig. 6 A/C Heater Housing Halves:
7. Separate the upper and lower HVAC housing.
8. Check all HVAC housing seals for misplacement or seal damage. Reposition or replace seals as required.
ASSEMBLY
1. Check all HVAC housing seals for misplacement or seal damage. Reposition or replace seals as required.
2. Place the upper and lower HVAC housing pieces together.
3. Install the HVAC housing retaining clips.
4. Install the HVAC housing screws.
5. Install the HVAC housing into the vehicle.
6. Evacuate the refrigerant system.
7. Recharge the refrigerant system.
8. Refill the cooling system.
9. Reconnect the battery negative cable.