Ignition Hall Effect Sensor: Description and Operation
Distributor- Cut Away View--Non Flexible Fuel Vehicles Will Only Have A Single 3 Pin Connector:
Hall Effect Pickup Assembly:
Location
Sensor (pick-up), mounted on distributor plate.
Purpose
Control Module uses sensor input to determine engine speed and cylinder identification, and synchronizes fuel injection accordingly.
Operation
Pick-up generates pulses when shutter blades interrupt magnetic field in pick-up.
The shutter blade with the window cut out produces the signal used to determine injection synchronization and detonation control.
Theory
Hall effect switch is mounted opposite a magnet.
A shutter wheel, containing four shutters, (one for each cylinder), passes between Hall effect switch and magnet.
When a shutter interrupts magnetic field, the switch turns OFF. When the shutter passes, the magnetic field is sensed, and the switch is turned ON.
Turning the switch ON and OFF generates voltage pulses which are sensed by the PCM.
If the PCM does not sense input from the Hall Effect pick-up, PCM will deactivate Auto Shutdown ASD and fuel pump relays. This interrupts voltage to the fuel pump, fuel injectors, and ignition coil, (no start condition).