Alternator Pulley / Clutch: Service and Repair

REMOVAL
1. Disconnect the negative battery cable.
2. Remove the air cleaner box.

Decoupler Pulley:

3. Remove the generator drive belt.

Decoupler Pulley Cover:

4. Remove the decoupler pulley cover.

Decoupler Pulley Removing:

5. Using a 10mm and 17mm wrench with Special Tool #8433A, move wrenches in the direction of the arrows to remove decoupler.

INSTALLATION

Decoupler Pulley Install:

1. Using a 10mm and 17mm wrench with Special Tool #8433A, move wrenches in the direction of the arrows to Install decoupler. Refer to the torque chart for torque value.

Decoupler Pulley Cover Installed:

2. Install the decoupler pulley cover.
3. Install the generator drive belt.
4. Install the air cleaner box.
5. Connect the negative battery cable.