Trunk Light Bulb: Service and Repair
REMOVAL1. Disconnect and isolate the battery negative cable.
Liftgate Trim Panel - Remove/Install:
2. Remove the liftgate trim panel.
Liftgate Lamp Unit - Remove/Install:
3. With the trim panel on the bench, push in on the side retaining clips of the liftgate lamp unit and push through trim panel to remove.
INSTALLATION
1. Align the liftgate lamp unit in the liftgate door trim panel opening and firmly snap into place.
2. Install the liftgate trim panel.
3. Connect the battery negative cable.
4. Verify vehicle and system operation.