Operation CHARM: Car repair manuals for everyone.

Navigation

WARNING: THIS VEHICLE CONTAINS MERCURY ADDED DEVICES ADDED BY THE MANUFACTURER: NAVIGATION DISPLAY. REMOVE DEVICES BEFORE VEHICLE DISPOSAL. UPON REMOVAL OF DEVICES, PLEASE REUSE, RECYCLE, OR DISPOSE OF AS HAZARDOUS WASTE.

A navigation system with a screen located in the instrument duster is an available option on this model.

A five inch (127 mm) Thin Film Transistor (TFT) screen mounted in the instrument cluster projects color navigation information into the center of the speedometer. The information includes maps, turn identification, selection menus and instructions. The system includes a variety of choices for selecting destinations and routes.

The navigation system is operated using push-buttons located in the instrument panel switch pod. The seven push-buttons have the following labels: NAV, ENTER, CANCEL and four scroll arrows (left, right, up and down). For a description of the instrument panel switch pod.

The information is displayed in map format, as turn-by-turn instruction or a combination of the two. The system also provides audio prompts for turns through the vehicle's audio system, overriding all other audio outputs (except hands free cellular system) to the front speakers that are active at the same time. Spoken prompts are recordings of a human voice.

For diagnostic information on the instrument panel switch pod.

The Navigation System uses a Global Positioning System (GPS) antenna mounted under the instrument panel to collect satellite data to compute the position of the vehicle. A navigation unit uses the satellite data to translate the vehicle location to latitude and longitude coordinates. It combines the latitude and longitude with proprietary map data from a DVD unit to perform all system calculations and display formatting. A single DVD disc contains map information for the entire United States. The DVD unit is mounted in the covered underfloor storage compartment at the rear of the vehicle. The map database information works with the application software to perform the following operations:
- Map Guidance
- Vehicle Positioning
- Address Retrieval

The system provides the following additional capabilities:
- Increase or decrease map scale using ENTER and direction arrows
- Scroll through map to a desired destination and press ENTER to begin routing
- Cancel route guidance
- Change language via the EVIC system using the MENU and STEP buttons
- Change display measurement units using the US/M button (Changes units for all displays in the vehicle)