Without A/C
Blower Motor Resistor:
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Electrical connectors, as necessary.
3. Blower motor resistor screws.
4. Blower motor resistor.
INSTALL OR CONNECT
1. Blower motor resistor.
NOTICE: Refer to "Fasteners" under "Vehicle Damage Warnings."
2. Blower motor resistor screws.
- Tighten screws to 1.9 Nm (17 lbs. in.).
3. Electrical connectors, as necessary.
4. Negative battery cable.
- Check circuit operation.