License Plate Lamp: Service and Repair

Rear License Plate Lamp Replacement

Removal Procedure





Caution:
Refer to Battery Disconnect Caution Battery Disconnect Caution.

1. Disconnect the negative battery cable.

2. Remove the screws and the license plate lamp assembly.

3. Remove the bulb.

Installation Procedure





1. Install the replacement bulb.

Notice:
Refer to Fastener Notice Fastener Notice.

2. Install the license plate lamp assembly with the screws.

Tighten the license plate lamp assembly screws to 2 Nm (18 lb in).

3. Connect the negative battery cable.