Instrument Panel Inflatable Restraint Module Replacement (1.4L/1.6L/1.8L)

Instrument Panel Inflatable Restraint Module Replacement (1.4L/1.6L/1.8L)

Removal Procedure





Caution: Refer to Sensing and Diagnostic Module Voltage after Ignition is Turned Off Caution Sensing and Diagnostic Module Voltage after Ignition is Turned Off Caution in Cautions and Notices.

Caution: Refer to Battery Disconnect Caution Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the glove box. Refer to Instrument Panel Storage Compartment Replacement Service and Repair in Instrument Panel, Gages, and Console.
3. Disconnect the passenger air bag yellow electrical connector.
4. Remove the passenger air bag module by removing the mounting bolts from the air bag bracket.

Installation Procedure




1. Install the passenger air bag module to the instrument panel (I/P).

Notice: Refer to Fastener Notice Fastener Notice in Cautions and Notices.

2. Install the passenger air bag module mounting bolts.

Tighten the passenger air bag module mounting bolts to 11 Nm (97 lb in).

3. Connect the passenger air bag yellow electrical connector.
4. Install the glove box. Refer to Instrument Panel Storage Compartment Replacement Service and Repair in Instrument Panel, Gages, and Console.
5. Connect the negative battery cable.